Non-Metallic Conduit & Fittings

RACK-A-TIERS 5 INTERNAL WIRE 3 LEGRAND 2 SIEMENS 2 ARLINGTON INDUSTRIES INC 1 CIRCA METALS 1 NEXANS 1

MM Plastic 5 O-Z/Gedney 2 Hydel 1 Nexans 1 Pass & Seymour 1 Rack-A-Tiers 1

Knockout Bushing 6 Junction Box Adapter 3 Bushing 21 ENT Conduit 16 Adapter 13 Bell End 7 Snap-In Connector 6 Type LL Conduit Body 6 Angled Form Stubby 5 1-Screw Saddle Connector 4 Meter Conduit Hub 4 Conduit To Duct Adapter 3 ENT Form Stubby 3 Meter Offset 2 Type C Conduit Body 7 Liquidtight Conduit 6 Rigid Conduit 6 Type LR Conduit Body 6 Anti-Short Bushing 5 Liquidtight Connector 5 2-Screw Saddle Connector 4 Conduit 4 Cord Grip 4 Strain Relief Connector 4 Strain Relief Dome Connector 4 Duct To PVC Conduit Reducing Adapter 3 Sealing Ring with Steel Retainer 3 Cap 2 Dome Connector 2 ENT Stubby Angled Adapter 2 Gasket 2 Knock-Out Bushing 2 Long Meter Offset 2 Sleeve 2 Bell End Coupling 1 Bullet Connector 1 DBII Pipe Conduit 1 Dry Connector 1 EMT Conduit 1 ENT Adapter 1 ENT Stubby Adapter 1 Extension Ring 1 Female Adapter 1 Liquidtight Electrical Conduit 1 Liquidtight Non-Metallic Connector 1 Offset Nipple 1 Plate Cover 1 Pulling Elbow 1 Rapid Fire Lumex Connector 1 Screw-On Connector 1 Strain Relief Grip 1 Stud Bushing 1 Sweep Elbow 1

Thermoplastic Rubber 3 6/6 Nylon 2 Die-Cast 2 Neoprene 2 Polyamide 2 Polyamide 6 2 Polyamide 6, Neoprene Seal 2 Polyurethane, Helix of Rigid Plastic Filament 2 Cast Zinc 1 Helix of Rigid PVC 1 Malleable Iron 1 Thermoplastic 1 UV Rated Plastic 1

Heyco-Flex™ 5 AnyBODY™ 4 Cor-Line®, Kwikon 3 Unilets 3 Insuliner® 2 Snap2It 2 Flexcor® 1 Rack-A-Tiers 1 Snap2It, Zero to 90 1 Wiremold 1

Liquidtight 4 Plug-in, Non-Metallic 4 Flexible, Concrete Tight 3 Sealing Ring for Conduit 3 Solid gasket for use with Form 35 conduit bodies 3 Type II, Belled 3 90°, Flexible, Non-Metallic 2 90°, Non-Metallic 2 ANGLED FORM STUBBY 2 Combination 2 Concrete Tight 2 Gasket for use with FM7 conduit bodies. 2 Insulating 2 Open 2 SNAP IN MALE ADPT 2 SafeZone Scan Head, 4 meter 2 Solid gasket for use with FM8 conduit bodies 2 Solid gasket for use with Form 85 conduit bodies 2 Solid, Flat 2 Straight, Concrete Tight 2 Type II 2 2-Inlet, Oval, Gangable, Sealable 1 3-Inlet, Oval 1 Concrete Tight, Straight 1 Conduit Body 1 Conduit to Duct 1 ENT FORM STUBBY 1 JUNCTION BOX ADPT 1 Liquid-Tight 90 DEG Connector 1 Liquid-Tight Straight Connector 1 Liquidtight, Dome 1 Non-Metallic, Flexible 1 Square 1 Straight, Flexible, Non-Metallic 1 Straight, Non-Metallic 1 Wide Range, Straight Male, Dust-Tight 1

#0 1 #1 1 #2 1 #3 1 #4 1

3 x 2 in 1 7/8 in 1 1/2 in 11 2-1/2 in 11 1 x 1/2 in 2 3/4 x 1/2 in 2 5 in 2 #7 1 1-1/2 x 1-1/4 in 1 1-1/4 x 1 in 1 1-3/8 in 1 1.734 in 1 1.984 in 1 2 1/2 in 1 2 x 1 in 1 2 x 1-1/4 in 1 2 x 4 in 1 2-1/2 x 2 in 1 2.469 in 1 3 x 2-1/2 in 1 3-1/2 in 1 4 x 2 in 1 4 x 3 in 1

Bell, Bell-in 1 Plain End 1 Snap-in 1 Straight 1

Snap-in 1 Solvent Weld 1

1.86 in 1 106.68 mm 1 1500 ft 1 2.0 in 1 2.525 in 1 20 ft 1 225 ft 1 240 ft 1 3.53 in 1 300 ft/Coil 1 325 ft/Reel 1 370 ft 1 4 in 1 44.63 mm 1 5.12 in 1 59.207 mm 1 60.35 mm 1

1.61 in ID x 1.9 in OD 1 1/2 in 1 101.6 mm OD 1 19.05 mm 1 2-1/2 in ID x 2-7/8 in OD 1 25.4 mm 1 3/4 in 1 31.75 mm OD 1 38.1 mm OD 1 63.5 mm OD 1 76.2 mm OD 1